Universal High Quality Car Remote Lock Central Locking Kit

Name: Remote central locking system
NO: GCL7101/G312
FEATURES:

1. Lock
2. Unlock
3. Car finding
4. Trunk release
5. Window rising signal output
6. Direction light connet wires
7. Easy to learning code by outside learning switch
8. May remote controller/transmitters can be selectable

Details Explanation

Lock
Press "LOCK" button once, lights flash once, window will roll up signal automatically, central door lock system will lock automatically. If lock the door beside the driver manually, other doors will be locked accordingly.

Unlock
Press "UNLOCK" button once, lights flash twice, central door lock system will be unlock automatically. If unlock the door beside the driver manually, other doors will be unlocked accordingly.

Car Finder
1. When locked, press "LOCK" / "MUTE" button once, lights flash five times, easily for car owner to find car.
2. Any status, press "BELL" button once, lights flash five times, easily for car owner to find car.

Trunk Release
Hold and keep press "UNLOCK" / "TRUNK" / "MUTE" for three seconds, trunk will be released automatically, lights flash three times (make sure your car installed a trunk release kit).

Positive / Negative Output Options For Trunk Release (See Wiring Diagram), Positive Output As Default.
Connecting "+" is positive 12V output; Connecting "-" is negative output (GND).

Window Rising Negative Output
This window rising signal wire can be set to be the signal wire of engine cut off output as per customized request. This changing methods is as following: When unlocked, hold and keep press "LOCK" button and "UNLOCK" button for three
seconds at the same time, lights will flash five times, then the signal wire has converted to the signal wire of engine cut off, when press "LOCK" button, the engine will be blockaded, vehicle can not start up. When press "LOCK" and
"UNLOCK" buttons for three seconds at the same time once again, lights flash four times, then the signal wire has converted to the window rising wire, when unlocked, press "LOCK", the windows will rising automatically.

Code Learning Process
Press the code learning switch for 1.5 seconds, lights will flash all the time, enter into the status of code learning module, then release the code learning switch, press any button of the new remote control once, lights go out and
flash up again, this means the first remote code learning succeed. Code learning of second remote is same as the first one, at most can learn six remote controls. After the sixth remote control learning code succeeded, please quit the
process immediately, there are five seconds left to learn the next remote control after the former remote control, if there is no any action within 5 seconds, lights will go out, code learning status exit.

NOTE: When learning the new remote controls, the old remote controls should go with them, if not, the code inside old remotes will be cleared out, can not remote any more.

Have CE certificate and we have exported our products to Germany,Hungary,Poland,Peru,brazil,venezuela,USA,etc.

We would be appreciated offer to anyone who is interested in our products  all around the world!

Our true desire has always been to have benifit for everyone.i hope you'll be one of them.welcome to browse our website,then choose the right one as you need,any feedback or suggestions.

please drop us email.then frankly communication,In this way,later both of us will be happy on the same page .

looking forward to hearing news for you!

thanks in advances!

Best Regards from all staff of GALERMIC ELECTRONICS CO.,LIMITED